Conte Billiards & Games
Search
SLATE JOINT WAX

SLATE JOINT WAX

Our specially formulated blue wax is used to seal the seams between slates and fill slate screw holes. It can also be used to make small repairs in the slate surface. Being a man-made product it is more consistent than natural waxes. It does not create smoke when heated, nor does it crack and chip under the cloth if applied properly. Will not bleed through cloth. Formed in easy-to-use 8”x ¾” sticks. One package includes 8 sticks of wax.

52-0235
SLATE JOINT WAX - 1 Package $21.99 SLATE JOINT WAX - 4 Packages $66.00 SLATE JOINT WAX - 8 Packages $126.00 SLATE JOINT WAX - 12 Packages $156.00

APPLICATION INSTRUCTIONS

  1. Hold a lit propane torch in one hand and the slate joint wax in the other hand.
  2. Heat the slate joint by slowly guiding the torch along it.
  3. Hold the end of the slate joint wax on the joint and follow, approximately 2 to 3 inches, behind the torch flame. The heat from the slate and the torch will cause the wax to melt and fill the slate joint.
  4. Allow the wax a minute or so to re-harden. Scrape the excess wax off with a scraper. Continue with the remaining slate joints.

*Be careful not to burn your hands with the torch, especially when the wax stick becomes shorter. Slate joint wax can also be used to fill minor pits and slate screw holes. If using to fill screw holes, cover the head of the screw with a small piece of paper or tape before applying the wax. This makes removal easier in the future.